EasyManua.ls Logo

Bosch WAX32MX2 - Page 51

Bosch WAX32MX2
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting de
disturbance Cause and troubleshooting
Spin result is
not satisfied-
lend. The laundry is
too wet / too damp.
Notice: Place large and small items of laundry
together in the drum. Laundry items of different sizes
are better distributed during spinning.
Start the program Fling.
Detergent residue
de on the damp
laundry.
Detergents can contain water-insoluble substances
that are deposited on the laundry.
Start the program Wash.
Detergent residue
de on the dry
laundry.
Detergents can contain water-insoluble substances
that are deposited on the laundry.
Brush out the laundry after washing and drying.
Home Connect wireless
does not work
according to.
Different causes are possible.
Go to www.home-connect.com.
No connection with
the home network.
Wi-Fi is turned off.
"Activate Wi-Fi on the device ", page 37
Wi-Fi is activated, but the connection to the home
network cannot be established.
1. Make sure the home network is available.
2. Reconnect the device to the home network.
"Connect the device to a WLAN home network (Wi-Fi)
with WPS function ", page 35
"Connect the device to a WLAN home network (Wi-
Fi) without WPS function ", page 36
At the water inlet
hose runs water
out.
The water inlet hose is not correctly / firmly
connected.
1. Connect the water inlet hose correctly. Connect
the water inlet hose
2. Tighten the screw connection.
At the water outlet
hose runs water
out.
The water drainage hose is damaged.
Replace the damaged water drainage hose.
The water drainage hose is not connected correctly.
Connect the water drainage hose correctly.
Connection types water drain
51

Table of Contents

Related product manuals