CHANNEL AND SYSTEM SETTINGS
30
|
ENG
LIVE STREAM MODE SETTINGS
Live Stream mode allows the system to be recognized as an audio interface when you
connect it to your computer using a USB-C® cable. This lets you perform live for an
online audience or record audio directly to your computer’s digital audio
workstation (DAW).
For sample setup scenario images, see page 53.
NOTE: During Live Stream mode, the system can send audio to your computer, but it
can’t receive it. USB playback is not supported.
About Live Stream mode
When Live Stream mode is enabled, the system passes a dual mono mix of Channels 1,
2, and 3 to a connected computer.
In this mode, the channel volume controls behave like faders on a mixer. Adjusting
channel volume using either the channel controls or the Bose Music app adjusts the
level of that channel within the mix being sent to your computer.
A monitor volume control also appears on Channel 3, allowing you to adjust the
master volume of the system speakers without aecting the computer mix
(see page 33).
Once you enable Live Stream mode, it stays enabled until you disable it or the system
powers o.
Enable/Disable Live Stream mode
1. Press and hold the channel control for Channel 3 until the additional controls menu
appears on the channel display.
Press + Hold
to access
additional
product
controls
Auto O
Live Stream
Sub EQ
Expanders
O
On
O
On
To Next Page
Loading...
Need help?
General
Weight and Dimensions
