Bose S1 PRO+ - Transmitter Audio Input and Controls

WIRELESS TRANSMITTER CONTROLS
38
|
ENG
CONNECT A PAIRED WIRELESS TRANSMITTER TO AN
AUDIO SOURCE
1. Power on the system (see page 18).
2. Press the back of the wireless transmitter and release so that it slides out of the
wireless transmitter charging port. Remove it from the charging port.
On the channel display, a battery icon briefly appears to indicate the transmitter
battery level.
3. Connect the transmitter to your audio source.
4. Power on the transmitter (see page 39). After a few seconds, a transmitter icon
appears on the channel display and the connection light on the transmitter glows
solid blue to indicate that the transmitter is connected (see page 63).
VOLUME
5. If you’re using the Bose Wireless Mic/Line Transmitter, change between mic and
line input settings if necessary to match the input requirements of your source
(see page 40).