x the destination of a route
You can also search for POIs around the Cursor.
Or you can save the location of the Cursor as:
x a Favourite
x a Road Safety Camera
x aPOI
x a map marker Pin
2.4.2.4 Original position in the Cursor menu
When the Cursor menu is open, a special icon ( ) shows the Cursor position the menu was
opened with.
You can move and zoom the map, and you can set the Cursor to a different place. The usual Cursor
(
) appears, and the buttons of the Cursor menu initiate actions for this new location.
To return to the original Cursor position, tap
. The map jumps back to the position with which the
Cursor menu was opened, and the
icon appears again.
2.4.3 Daytime and night colour profiles
iGO8 uses different colour profiles during the day and during the night.
x Daytime colours are similar to paper road maps.
x The night colour profiles use dark colours for large objects to keep the average brightness of
the screen low.
iGO8 offers different daytime and night colour profiles. It can also switch automatically between the
daytime and the night schemes based on the current time and GPS position a few minutes before
sunrise, when the sky has already turned bright, and a few minutes after sunset, before it becomes
dark.
2.4.4 Colour scheme in tunnels
When entering a tunnel, the colours of the map change. All buildings disappear, large objects (such
as surface waters or forests) and empty areas between roads become black.
However, roads and streets keep their original colours from the daytime or night colour scheme
currently used.
After leaving the tunnel, the original colours return.
2.4.5 Route calculation and recalculation
iGO8 calculates the route based on your preferences:
22
To Next Page
