Recording the travelled path (creating a Track Log)
1. Start driving.
2. Tap the following buttons:
, , .
3. Start the recording: tap the
button.
You return to the map and you can continue driving.
4. Repeat the above steps, then tap
later to stop the recording. iGO8 labels the
Track Log with a time stamp.
(As an alternative, you can tap the
button in the Quick menu to start, and later to stop the Track
Log recording.)
Simulating a Track Log on the map
1. Tap the following buttons: , , .
2. Locate the desired Track Log, and then tap the
button next to it.
3. The map returns, and the Track Log simulation (a life-like replay) begins.
4. You can stop the replay any time by tapping the
button.
Changing the colour of a Track Log
1. Tap the following buttons: , , .
2. Tap the desired Track Log and then tap one of the colour buttons.
3.12 Saving the active route
This feature is available in Advanced mode only.
The procedure is explained starting from the Map screen.
1. Tap the following buttons:
, , .
2. Enter a name for the saved route, and then tap
.
44
To Next Page
