x Via the Route Information screen using a shortcut: tap , .
In Simple mode the last option is available only.
3.6 Watching the simulation of the route
This feature is available in Advanced mode only.
The procedure is explained starting from the Map screen.
1. Tap the following buttons:
, .
2. The Route menu appears. There are two ways of running the route simulation:
x Tap
to run the simulation at high speed to give you a quick overview of
the route.
x Tap
to run the simulation at normal speed and with voice guidance
instructions announced. This option is for demonstration purposes, or for checking
difficult parts of the route in advance.
3. The simulation can be aborted any time by tapping
.
3.7 Enabling Safety Mode
This feature is available in Advanced mode only.
Safety Mode disables the touch screen above 10 km/h (6 mph) to keep your attention on the road.
While driving, you will not be able to set a new destination or to change settings. The only screen
control that remains enabled is the gesture that puts you back on the Map screen.
The procedure is explained starting from the Map screen.
Tap the following buttons:
, , , .
3.8 Pausing the active route
You do not need to pause the active route: when you start driving again, iGO8 restarts the voice
instructions from your position.
42
To Next Page
Loading...
