Symbol Name Description
needs to be turned off to keep the selected point as
the start point.
If automatic off-route recalculation is disabled for any
of the above, tapping the
icon in the Turn
Preview field not only initiates route recalculation from
the current GPS position, but it will re-enable the
automatic off-route recalculation as well.
Via point
A via point is an intermediate destination. You can
place as many via points as you want.
Destination (end point) The last point of the route, the final destination.
Route colour The route always stands out with its colour on the
map, both in daytime and in night colour mode. The
active leg of the route is always displayed in a brighter
shade than the inactive (upcoming) legs.
Active leg of the route
The section of the route on which you are driving.
If you have not added any via points (only a
destination), the entire route is the active leg. If you
have added via points, the active leg is the part of the
route from your current location to the next route point
(the next via point, or the destination if there are no
more via points to reach).
Inactive legs of the route The future sections of the route; each of them
becomes active when you reach the via point at its
beginning.
Streets and roads that are
excluded from the
navigation
You can choose whether you want to use or avoid
certain road types (page 71). However, when iGO8
cannot avoid such roads, the route will include them
and it will show them in a colour that is different from
the route colour.
53
To Next Page
