Boston Scientific Precision - Lead Extension; Lead Splitter

Device and Product Description
Clinician Manual
97035873-01 3 of 75
Lead Extension
Lead Extensions are designed to connect the percutaneous and paddle leads to the Precision IPG for spinal
cord stimulation. The extension may be added to a lead to externalize the lead for a trial procedure or to
extend the lead when a permanent IPG is implanted.
Lead extensions are available in lengths of 25 cm, 35 cm, and 55 cm. Each extension has eight electrode
contacts located near the distal end. Each contact is 3 mm in length and is spaced 1 mm from the adjacent
contact. The extension can be connected to either the Trial Stimulator (via an OR Cable Assembly included in
the Leads Kit) or directly to the Precision IPG.
Lead Splitter
The 2x4 Splitters are designed to connect multiple percutaneous leads to the Precision IPG. The Linear leads
may be inserted into a splitter for a maximum of four Linear leads per IPG. Four of the eight contacts of each
Linear lead will be activated. Two congurations of 2x4 splitters are available: Distal 4 (D4) and Wide 4 (W4).
The two versions offer different contact congurations.
The Lead Splitter 2x8 is required to connect the Innion 16 contact lead to the IPG. Only one Innion 16 lead
through one Splitter 2x8 can be connected to a Precision IPG.