22 / 30
5.1.3. Exit MIDI setting
Press and hold down the „Record“ button. While holding down the
„Record“ button tap the „Rec Exit“ button to exit MIDI setting.
5.1.4. Receiving a MIDI file dump
Tap the „Flash“ button 3 three times while holding down the „Record“
button, the display reads „IN“ indicating the controller is ready to
receive MIDI file dump.
5.1.5. Sending a MIDI file dump
Tap the “Flash” button 4 three times while holding down the “Record”
button, the display reads “OUT” indicating the controller is ready to
send a file.
Note: 1. During file dump, all other operations will not function. Functions will automatically return
when the file dump is complete.
2. File dump will be interrupted and stop if errors occur for power failure.
5.1.6. Implementation
1. During receiving and sending MIDI data, all MIDI scenes and channels being run will automatically
paused if there is no response within 10 minutes.
2. During receiving and sending file dump, the controller will automatically search for or send device ID
of 55H(85), a file named DC2448 with an extension of BIN(SPACE).
3. File dump allows this controller to send its MIDI data to next unit or other MIDI devices.
To Next Page
Loading...
Need help?
General