EasyManuals Logo

Botex DC-2448 User Manual

Botex DC-2448
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4 / 30
1. Safety instructions
Read the safety instructions and also this manual carefully.
Keep the manual.
Observe all red flags.
Observe the manual.
To prevent fire or electric shocks, protect the device against rain and
humidity
Pull the plug before opening the housing.
To prevent an electric shock you should not remove the cover.
Do not operate the device in the near of water.
Use only a dry cloth for cleaning.
1.1. FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperature
Avoid exposing it to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 41°F /5°C, or exceeding 95°F /35°C.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt. Pull the plug before
cleaning.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing, do not
open the cabinet by yourself, it might result a danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not
using the device for an extended period of time, be sure to disconnect the plug from the receptacle.
Ventilation
It is not allowed cover fans and air in and outlets.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Botex DC-2448 and is the answer not in the manual?

Botex DC-2448 Specifications

General IconGeneral
BrandBotex
ModelDC-2448
CategoryLighting Equipment
LanguageEnglish