Bpt TH 350 - 7 - Temperature Level Personalisation for the Heating Programme; Heating Programme Temperature Levels (Part 1)

25
To reset the default parameters, see chapter 21 (Reset).
6.8- Reinsert the main unit of the thermostat.
7  TEMPERATURE LEVEL PERSONALISATION
FOR THE HEATING PROGRAMME
7.1- Remove the main unit of the unit.
7.2- Make sure that the unit is in AUTOMATIC mode.
7.3- Check to see that the heating symbol is displayed.
If not then press button (fig. 41).
7.4- Press button P (fig. 42).
The temperature range for T1 will be displayed and in place
of the current time the symbol together with the value
of the temperature assigned to the T1 temperature range (set
in memory at, 16°C).
41
39
40
42