Multimedia
Image properties: Set the sharpness, hue, saturation, brightness, and contrast
levels at Low, Medium or High. The default setting is Auto.
Anti-icker: Adjust the setting to eliminate moiré or ickering effects or you
can also disable it.
Restore defaults: Restore the factory settings of the camera.
· Photo Settings
Zero shutter delay settings: Enable/disable image stabilisation.
Face detection: Enables/disables automatic face detection.
Smile shot: Enables/disables automatic smile detection.
HDR: High Dynamic Range is a photo mode that increases the image contrast
by taking 3 shots with different exposures and superposing them onto one
image.
Timer: Adjust the countdown timer (from 2s to 10s, or disable it).
Continuous shot: Set the number of shots taken if you hold down the shutter
release continuously(40 or 99 shots).
Picture size: Set the image quality by choosing values ranging from 1 Mpx up
to 8 Mpx.
Preview size: Adjust the size of images in preview mode. Select from Full screen
or Standard (4:3).
ISO: Select the level of light sensitivity according to the current conditions.
Select Auto mode or you can manually set the values from 100 to 1600.
To Next Page
Loading...
