EDP 100-214-239 Rev. A February 2001
Manual Change Information
At Branson, we strive to maintain our position as the leader in ultrasonics plastics joining,
cleaning and related technologies by continually improving the designs, circuits and compo-
nents in our equipment. These improvements are incorporated as soon as they are developed
and thoroughly tested.
Information concerning any improvements will be added to the appropriate technical docu-
mentation at its next revision and printing. Therefore, when requesting service assistance for
specific units, note the Release information found on the cover of this document, and refer to
the printing date which appears in the lower right corner of this page .
Patents and Copyright
Copyright
©
1998 by Branson Ultrasonics Corporation, Danbury, Connecticut, U.S.A.
All rights reserved.
Manual part number: EDP 100-214-239 Rev. A, printed February 2001.
Branson Ultrasonics Corporation equipment is manufactured under one or more of the fol-
lowing U. S. Patents:
4,249,986; 4,315,181; 4,363,992; 4,551,690; 4,651,043; 4,786,356; 4,973,876; 5,095,188;
5,435,863.
Note: Sonifier
®
is a registered trademark of Branson Ultrasonics Corporation, Danbury,
Connecticut, U.S.A. Other trademarks and service marks respectfully mentioned herein are
held by their respective owners.
To Next Page
Loading...
