100-214-239 Rev. A 4-1
Installation Checklist
Digital Sonifier
4InstallationandSetup
4.1 Installation Checklist ---------------------4-1
4.2 System Block Diagram --------------------4-2
4.3 System Component Description ---------------4-2
4.4 Assembling the Equipment------------------4-9
4.5 Input Power Requirements ------------------4-13
4.6 Electrical Connections to Equipment-------------4-13
4.7 Guards and Safety Equipment ----------------4-17
4.8 Ultrasonic Test ------------------------4-18
4.1 Installation Checklist
To install the Digital Sonifier, you will need these items:
• Digital Sonifier unit
• Power cordset
• Converter
• Horn (and horn tips, if applicable)
• Spanner wrench (can be ordered from Branson; refer to Appendix C.)
• Open-ended wrench (can be ordered from Branson; refer to Appendix C.)
• Any accessories shipped with the unit
• Any customer-supplied items, (i.e., computer, printer, and temperature probe)
Refer to
Appendix B, Optional Items Parts List
, for specific parts required for the optional items ,
and to
Appendix C, Accessories Parts List
, for parts needed for the available accessories.
To Next Page
Loading...
