100-214-239 Rev. A 6-31
Entering Operation Parameters
Digital Sonifier
NOTE
i A shortcut tip: If you Clear either Pulse time parameter and press Enter, both values will be
cleared. You do not need to Clear both parameters.
Press the Enter key to store the value
for Pulse On, or press the Clear key to
re-enter the value.
As soon as you have pressed Enter
to store the Pulse On value, the system
moves to the Pulse Off parameter line.
Use the numeric keys to enter the
Pulse Off time, in tenths of seconds.
Press the Enter key to store the value
for Pulse Off, or press the Clear key to
re-enter the value.
Clear
Enter
or
789
456
123
0
Clear
Enter
or
To Next Page
Loading...
