Electric motor
The standard electric motor is an enclosed three-phase asynchronous motor, suitable for use in
combination with a frequency inverter. As a standard, PTC temperature sensors are built-in.
Note: In case of doubt about the local applicable regulations for the drive connection, contact your
Bredel representative.
Protection class IP55/IK08
Insulation class F
Increase in temperature Within class B
Voltage/frequency 230/400 V - 3 phases - 50 Hz
Bredel Variable Frequency Drive (VFD) (optional)
The Bredel Variable Frequency Drive (VFD) has been preprogrammed and only needs to be connected
to the mains.
RFI filter Integrated RFI filter B (industrial applications).
Control
Manual control for setting the speed and the keys for starting forward, stop and
starting reverse. More options are available.
Protection
class
IP55
Mains power
supply
Several types are available; the choice depends on the power and the local electricity
grid:
• 200-240 V ± 10%; 50/60 Hz ± 5%; 1 ph
• 200-240 V ± 10%; 50/60 Hz ± 5%; 3 ph
• 400-480 V ± 10%; 50/60 Hz ± 5%; 3 ph
88 m-bredel-25-32-en-05
To Next Page
Loading...
