Brink Air Control Ventilation - Setting Date

4.2.3 Setting date
You can set the date. The date is visible on the main screen.
Perform the following actions to set the date:
▪ Press returnkey "2" as many times as necessary to
get to the main screen
▪ Press setting knob "1"; ‘Main Menu’ opens
▪ Select ‘Basic Settings’ by turning setting knob "1"
▪ Press setting knob "1"; ‘Basic Settings’ opens
▪ Select ‘Date’ by turning setting knob "1"
▪ Press setting knob "1" ‘Date’ opens
▪ Change the day by turning setting knob "1"
▪ Repeat the previous two steps for both the months
and the year
▪ Press returnkey "2" as many times as necessary to
get to the main screen
1 = Flow rate indicator
2 = eBus connection indicator
3 = Fan indicator
4 = Fault symbol
5 = Filter message
6 = Current time block
7 = Current time
8 = Current date
Brink Air Control- Ventilation 614884-B Brink / 13