5.2 Selecting a device connected to the Brink Air Control- Ventilation
You can choose the device you want to regulate with the control if multiple devices are connected to Brink Air
Control- Ventilation ( ®
Selecting a device connected to the Brink Air Control- Ventilation page 14 ).
5.3 Weekly programmes P1, P2 and P3
You can programme the regulation of the ventilation mode in a weekly program. You can choose from programs
P1, P2 and P3.
Program P1
With this you create a day program for every day of the week.
Program P2
With this you create two day programs.
One day program for weekdays ‘mo-fri’ and one day program for the weekend ‘sa-su’.
Program P3
With this you create seven day programs.
Separately for every day of the week.
5.3.1 Standard settings P1, P2 and P3
The Brink Air Control- Ventilation has standard set weekly programmes. You can find these settings in appendix
(®
Appendix: Standard settings weekly programs page 29).
Brink Air Control- Ventilation 614884-B
To Next Page
Loading...