9-3
SPLASH SHIELD
Allow cover assembly to
cool before cleaning. Hot
surfaces could cause serious burns.
Clean the splash shield according to the fol-
lowing instructions:
1. Raise cover 3 - 5” above cooking well.
2. Rotate cover handle to a centered
position.
3. Loosen four front thumb screws
attaching splash shield to articulating
collar inside.
4. Slide splash shield forward to first
bend of the cover handle (1).
5. Clean the top and underside of splash
shield and top of the cover.
6. Assemble in reverse order.
Make sure back splash
shield and splash shield
are assembled correctly after cleaning.
The cover may not close correctly if they
are not.
FILTER PAN & COVER
Wipe all oil off the outside of the filter pan
and both sides of the filter pan cover.
Rags or papers contain-
ing cooking oil can catch
fire if exposed to heat. Laundering will
not remove the oil. Dispose of all oil-
soiled papers and rags in a trash con-
tainer that is in a ventilated area away
from all cooking equipment or other heat
sources such as direct sunlight.
COVER LIFT
Clean daily. Wipe with a clean cloth or
paper towel. No lubrication is necessary.
broaster.com Manual #21469 621 Rev 11/23
To Next Page
Loading...
