Brocade Communications Systems FWS624 User Manual

42 Brocade FastIron WS Hardware Installation Guide
53-1002188-01
Managing FastIron WS temperature settings
4
DRAFT: BROCADE CONFIDENTIAL
Syntax: show chassis
Displaying Syslog messages for temperature on the FastIron WS
The software sends a Syslog message and an SNMP trap if the temperature crosses the warning or
shutdown thresholds. The following methods describe how to view the system log on the device. If
you have configured the device to use a Syslog server or SNMP trap receiver, refer to the
documentation for the server or receiver.
FastIron# show chassis
chassis Power supply/fan/temperature
FastIron# show chassis
Power supply 1 (NA - AC - Regular) present, status ok Power supply 2 not present
Fan 1 ok, speed (auto): [[1]]<->2<->3
Fan 2 ok, speed (auto): [[1]]<->2<->3
Fan controlled temperature: 50.5 deg-C
Fan speed switching temperature thresholds:
Speed 1: NM<----->53 deg-C
Speed 2: 37<----->55 deg-C
Speed 3: 50<-----> 90 deg-C (shutdown)
Sensor B Temperature Readings:
Current temperature : 50.5 deg-C
Warning level.......: 55.0 deg-C
Shutdown level......: 90.0 deg-C Sensor A Temperature Readings:
Current temperature : 42.0 deg-C Boot Prom MAC: 001b.ed7e.7040 Management
MAC: 001b.ed7e.7040 FWS648G Router#tempera
temperature temperature sensor commands
FastIron#temperature war
warning Temperature at which the module sends a warning
FastIron#temperature warning 40
FastIron#
!!! Temperature is over warning level !!!
SYSLOG: <9>Jan 1 00:00:00 FWS648G Router System: Temperature 50.0 C degrees,
warning level 40.0 C degrees, shutdown level 90.0 C degrees
SYSLOG: <12>Jan 1 00:00:00 FWS648G Router System: Temperature is over warning
level
FastIron#temper
temperature temperature sensor commands
FastIron# temperature shut 45

Brocade Communications Systems FWS624 Specifications

General

Brand	Brocade Communications Systems
Model	FWS624
Category	Switch
Language	English