EasyManuals Logo

Brother 8085DN - DCP B/W Laser User Guide

Brother 8085DN - DCP B/W Laser
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #120 background imageLoading...
Page #120 background image
Troubleshooting and routine maintenance
107
C
Checking the remaining life of
parts C
You can see remaining life of the machine’s
drum unit and periodic maintenance parts on
the LCD.
a Press Menu, 6, 7.
67.Parts Life
1.Drum
2.Fuser
3.Laser
Select ab or OK
b Press a or b to choose 1.Drum,
2.Fuser, 3.Laser, 4.PF Kit MP,
5.PF Kit 1 or 6.PF Kit 2
1
.
Press OK.
67.Parts Life
1.Drum
Remaining: XX%
1
PF Kit 2 appears only when the optional
LT-5300 tray is installed.
c Press Stop/Exit.
Note
The life check will be accurate only if you
have reset the drum counter when you
installed a new drum unit. It will not be
accurate if that part’s life counter was
reset during the life of the used part.
Reset C
The following reset functions are available:
1 Network
You can reset the print server back to its
default factory settings such as the
password and IP address information.
2 All Settings
You can reset all the machine settings
back to the settings that were set at the
factory.
Brother strongly recommends you use this
operation when you dispose of the
machine.
Note
Unplug the interface cable when you reset
All Settings.

Table of Contents

Other manuals for Brother 8085DN - DCP B/W Laser

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother 8085DN - DCP B/W Laser and is the answer not in the manual?

Brother 8085DN - DCP B/W Laser Specifications

General IconGeneral
Printer TypeLaser
FunctionsPrint, Copy, Scan
Duplex PrintingYes
Copy ResolutionUp to 600 x 600 dpi
Scanner TypeFlatbed, ADF
Memory32 MB
Operating System CompatibilityWindows, Mac, Linux
Scan ResolutionUp to 19200 x 19200 dpi (interpolated)
Paper Capacity250 sheets
ConnectivityEthernet

Related product manuals