70
Paper handling difficulties C
Difficulties Suggestions
The machine does not load
paper.
The LCD shows No Paper
or a Paper Jam message.
If there is no paper, load a new stack of paper into the paper
tray.
If there is paper in the paper tray, make sure it is straight. If the
paper is curled, you should straighten it. Sometimes it is
helpful to remove the paper, turn the stack over and put it back
into the paper tray.
Reduce the amount of paper in the paper tray, and then try
again.
Check that the MP tray mode is not chosen in the printer
driver.
If the LCD shows Paper Jam message and you still have a
problem, see Paper jams on page 86.
The machine does not feed
paper from the MP tray.
Fan the paper well and put it back in the tray firmly.
Make sure that MP tray mode is chosen in the printer driver.
How do I print on
envelopes?
You can load envelopes from the MP tray. Your application must
be set up to print the envelope size you are using. This is usually
done in the Page Setup or Document Setup menu of your
application. (See your application’s manual for more information.)
What paper can I use? You can use thin paper, plain paper, thick paper, bond paper,
recycled paper, envelopes, labels and transparencies that are
made for laser machines. (For details, see Acceptable paper and
other print media on page 14.)
There is a paper jam. (See Paper jams on page 86.)
To Next Page
Loading...
Need help?
General
