Brother 8085DN - DCP B/W Laser User Guide

Making copies
33
5
Copy options
(temporary settings) 5
When you want to quickly change the copy
settings temporarily for the next copy, use the
temporary Copy keys. You can use different
combinations.
The machine returns to its default settings
one minute after copying.
Enlarging or reducing the
image copied 5
You can choose the following enlargement or
reduction ratios:
* The factory setting is shown in Bold with an
asterisk.
Auto sets the machine to calculate the
reduction ratio that best fits the size of paper.
Auto is only available when using the ADF.
Custom(25-400%) allows you to enter a
ratio from 25% to 400%.
To enlarge or reduce the next copy follow the
instructions below:
a Load your document.
b Use the dial pad to enter the number of
copies (up to 99).
c Press Enlarge/Reduce.
Press c.
d Do one of the following:
 Press a or b to choose the
enlargement or reduction ratio you
want.
Press OK.
 Press a or b to choose
Custom(25-400%).
Press OK.
Use the dial pad to enter an
enlargement or reduction ratio from
25% to 400%. (For example, press
53 to enter 53%.)
Press OK.
e Press Start.
Note
Page Layout Options 2 in 1(P), 2 in 1(L), 4
in 1(P) or 4 in 1(L) are not available with
Enlarge/Reduce.
Press 100%*
97% LTRiA4
94% A4iLTR
91%FullPage
85% LTRiEXE
83% LGLiA4
78% LGLiLTR
70% A4iA5
50%
Custom(25-400%)
Auto
200%
141% A5iA4
104% EXEiLTR

Brother 8085DN - DCP B/W Laser Specifications

General

Printer Type	Laser
Functions	Print, Copy, Scan
Duplex Printing	Yes
Copy Resolution	Up to 600 x 600 dpi
Scanner Type	Flatbed, ADF
Memory	32 MB
Operating System Compatibility	Windows, Mac, Linux
Scan Resolution	Up to 19200 x 19200 dpi (interpolated)
Paper Capacity	250 sheets
Connectivity	Ethernet