Brother 8085DN - DCP B/W Laser User Guide

Chapter 4
28
Changing the password for
the administrator 4
a Press Menu, 1, 6.
16.Function Lock
a Lock OffiOn
Set Password
b Setup ID
Select ab or OK
b Press a or b to choose Set Password.
Press OK.
c Enter the registered four-digit password.
Press OK.
d Enter a four-digit number for the new
password.
Press OK.
e If the LCD shows Verify: re-enter the
new password.
Press OK.
f Press Stop/Exit.
Setting up public user mode 4
Public user mode restricts the functions that
are available for public users. Public users do
not need to enter a password to access the
features made available through this setting.
You can set up one Public user.
a Press Menu, 1, 6.
16.Function Lock
a Lock OffiOn
Set Password
b Setup ID
Select ab or OK
b Press a or b to choose Setup ID.
Press OK.
c Enter the administrator password.
Press OK.
d Press a or b to choose Public.
Press OK.
e Press a or b to choose Enable or
Disable for Copy.
Press OK.
After you have set Copy, repeat this
step for Scan, USB Direct and
PC Print.
When you have finished changing
settings press d or c to choose Exit
and press OK.
f Press Stop/Exit.

Brother 8085DN - DCP B/W Laser Specifications

General

Printer Type	Laser
Functions	Print, Copy, Scan
Duplex Printing	Yes
Copy Resolution	Up to 600 x 600 dpi
Scanner Type	Flatbed, ADF
Memory	32 MB
Operating System Compatibility	Windows, Mac, Linux
Scan Resolution	Up to 19200 x 19200 dpi (interpolated)
Paper Capacity	250 sheets
Connectivity	Ethernet