Brother DCP-1601

Chapter 1
26
2.Fax (For MFC-1910W, MFC-1911NW and MFC-1916NW)
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
1.Setup
Receive
(In FAX mode
only)
1.Receive
Mode
Chooses the receive
mode that best suits
your needs.
Fax Only* Your machine
automatically
answers every call as
a fax. Fax Only is
displayed on the LCD
when set.
71
Fax/Tel Your machine
controls the line and
automatically
answers every call. If
the call is not a fax,
the phone will ring for
you to pick up the
call. Fax/Tel is
displayed on the LCD
when set.
External TAD
(Except MFC-
1916W)
Your external
telephone answering
device (TAD)
automatically
answers every call.
Voice messages are
stored on the
external TAD. Fax
messages are
automatically printed.
External TAD is
displayed on the LCD
when set.
Manual You control the
phone line and must
answer every call
yourself. Manual is
displayed on the LCD
when set.
2.Ring Delay The Ring Delay
setting sets the
number of times the
machine rings before
it answers in Fax
Only and Fax/Tel
modes.
(02 - 10)
02*
(Example for
Australia)
If you have external
or extension
telephones on the
same line as the
machine, choose the
maximum number of
rings.
72
The factory settings are shown in Bold with an asterisk.