Brother DCP-1601

General information
27
1
1.Setup
Receive
(In FAX mode
only)
(Continued)
3.F/T Ring
Time
Sets the length of the
fast double-ring time
in Fax/Tel mode.
20 Secs
30 Secs*
40 Secs
70 Secs
(For New Zealand)
20 Secs
30 Secs*
40 Secs
55 Secs
If the call is a fax,
then your machine
will receive it;
however, if it is a
voice call the
machine will sound
the F/T ring (a fast
double-ring) for the
time you have set in
the F/T Ring Time
setting. If you hear
the F/T ring it means
that you have a voice
caller on the line.
72
4.Fax Detect Receives fax
messages without
pressing Start. When
Fax Detect is On, you
can receive fax
messages without
pressing Start.
On* The machine can
receive a fax
automatically, even if
you answer the call.
72
Semi (MFC-
1916NW)
The machine will only
receive a fax call
automatically if you
answered it using the
machine's handset.
Off If you are at the
machine and answer
a fax call first by lifting
the handset of an
external telephone
(For MFC-1910W,
MFC-1911NW and
MFC-1916NW) or the
machine (For MFC-
1916NW), Press
Start and press 2.
5.Auto
Reduction
The machine
calculates the
reduction ratio by
using the page size of
the fax and your
Paper Size setting
(Menu, 1, 3, 2).
On* If you choose On, the
machine
automatically
reduces each page of
an incoming fax to fit
on one page of A4,
Letter, Legal, or Folio
size paper.
Off
2.Fax (For MFC-1910W, MFC-1911NW and MFC-1916NW) (continued)
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
The factory settings are shown in Bold with an asterisk.