Brother DCP-7010L - DEVICE SETTINGS (Not Available for DCP-7010 L and DCP-7025)

Using your machine with a Macintosh
®
7 - 35
7
DEVICE SETTINGS (not available for DCP-7010L and DCP-7025)
In this section you can configure the machine settings by
clicking the button.
Note
When the machine is connected to a network, you cannot use
these functions.
Remote Setup
The Remote Setup button allows you to open the Remote
Setup Program window with which you can configure the
machine setting menus.
Quick-Dial
The Quick-Dial button allows you to open the Set Quick-Dial
window of the Remote Setup Program, so you can easily
register or change the dial numbers from your computer.