Using your machine with a Macintosh
®
7 - 13
7
Scanning from a Macintosh
®
The Brother machine software includes a TWAIN Scanner driver for Macintosh
®
. You can use this
Macintosh
®
TWAIN Scanner driver with any applications that support the TWAIN specification.
Note
If you want to scan from the machine on a network, select the networked machine in the Device Selector
application located in Macintosh HD/Library/Printers/Brother/Utilities.
Accessing the scanner
Run your Macintosh
®
TWAIN-compliant application software.
The first time you use the Brother TWAIN driver, set it as the
default by choosing Select Source (or the other menu name
to select the device). For each document you scan choose
Acquire Image or Scan. The scanner setup dialog box will
appear.
Note
■ The screen shown in this section are from Mac OS
®
X 10.2. The screen on your Macintosh
®
may vary
depending on your operating system.
■ The method of selecting the source or choosing to scan may vary depending on the application software
you are using.
(Mac OS
®
X 10.2)
To Next Page
Loading...
