Using your machine with a Macintosh
®
7 - 5
7
Using the PS driver with your Apple
®
Macintosh
®
(DCP-7025, MFC-7225N and MFC-7820N only)
Note
■ To use the PS driver on a Network, see the Network User’s Guide on CD-ROM.
■ To use the PS driver with a USB cable, you need to set the Emulation to BR-Script 3 by using the
control panel before connecting the USB cable. (See Popular Printer Emulation Support (DCP-7025,
MFC-7225N and MFC-7820N only) on page 1-4.)
■ The PS driver does not support the following functions:
• HQ 1200
•PC-Fax Sending
For Mac OS
®
X users
You need to install the PS driver using the following instructions.
Note
■ If you use a USB cable and your Macintosh
®
is “Mac OS
®
X”, only one printer driver for a machine can be
registered in Print Center.
■ If a Brother Native Driver (MFC-XXXX or DCP-XXXX) is already listed in Printer list, you will need to delete
it and then install the PS driver.
1 Select Applications from the Go menu.
2 Open the Utilities folder.
To Next Page
Loading...
