Brother DCP-7010L - DEVICE SETTING (Not Available for DCP-7010 L and DCP-7025); Remote Setup; Quick-Dial

Using ControlCenter2.0 (For Windows
®
)
3 - 14
3
DEVICE SETTING (not available for DCP-7010L and
DCP-7025)
In this section you can configure the machine settings by
clicking the button.
Note
When the machine is connected to a network, you cannot use
this function.
Remote Setup
The Remote Setup button allows you to open the Remote
Setup Program window with which you can configure the
machine setting menus.
Quick-Dial
The Quick-Dial button allows you to open the Set Quick-Dial
window of the Remote Setup Program, so you can easily
register or change the dial numbers from your PC to the
machine.