Brother DCP-7010L - Scanning a Document Using WIA Driver (for Windows XP Only); WIA Compliant; How to Access the Scanner

How to scan using Windows
®
2 - 2
2
Scanning a document using WIA driver
(For Windows
®
XP only)
WIA compliant
Windows
®
XP uses Windows
®
Image Acquisition (WIA) for scanning images from the machine. You can scan
images directly into the PaperPort
®
9.0SE viewer that Brother included with your machine or you can scan
images directly into any other software application that supports WIA or TWAIN scanning.
How to access the scanner
1 Open your software application to scan the document.
Note
The instructions for scanning in this Guide are for when you use ScanSoft
®
PaperPort
®
9.0SE. The steps for
scanning from another application may vary.
2 Select Scan from the File drop-down menu or select the Scan button.
The Scan panel appears on the left of the screen.
3 Select WIA-Brother MFC-XXXX or WIA-Brother DCP-XXXX from the Scanner drop-down list box.
Note
■ If the machine is connected via:
Parallel-use WIA-Brother MFC-XXXX or WIA-Brother DCP-XXXX
USB-use WIA-Brother MFC-XXXX USB or WIA-Brother DCP-XXXX USB
LAN-use WIA-Brother MFC-XXXX LAN or WIA-Brother DCP-XXXX LAN
(Where XXXX is your model name.)
■ If you choose TW-Brother XXXXXXX, the TWAIN driver will run.
4 Click Scan.
The Scan dialog box will appear: