Brother DCP 8060 - Sending a File as a PC-FAX Using the Facsimile Style User Interface

6.
99
Sending a file as a PC-FAX using the Facsimile style user interface 6
a Create a file in any application on your PC.
b Click File, then Print.
The Print dialog box appears:
c Choose Brother PC-FAX v.2 as your printer, and then click Print (or OK).
The Facsimile style user interface appears:
Note
If the Simple style user interface appears, change the user interface selection setting. (See Sending setup
on page 91.)
d Enter a fax number using any of the following methods:
 Use the dial pad to enter the number.
 Click any of the 10 Speed-Dial buttons.
 Click the Address Book button, and then choose a member or group from the Address Book.
If you make a mistake, click Clear to delete all the entries.
e To include a cover page, click Cover Page On.
Note
You can also click the cover page icon to create or edit a cover page.