1.
30
Features in BR-Script3 (Post Script
®
3™ language emulation)
Printer compatible driver 1
The BR-Script3 (PostScript
®
3™ language emulation) printer driver supports Windows
®
98/98SE/Me/2000
Professional/XP and Windows NT 4.0.
To install the PS driver
If you have already installed the following the instruction in the Quick Setup Guide, insert the CD-ROM into
the CD-ROM drive on your PC and click Install MFL-Pro Suite again and follow the on-screen instructions.
When the Select Components screen appears, check PS Printer Driver, and then continue following the
on-screen instructions.
If you have not previously installed the driver and software, insert the CD-ROM into the CD-ROM drive on
your PC and click Install MFL-Pro Suite and follow the on-screen instructions. When the Setup Type screen
appears, choose Custom Install and check the PS Printer Driver. Then continue following on-screen
instructions.
Note
• The screens in this section are from Windows
®
XP. The screens on your PC will vary depending on your
Operating System.
• You can download the latest driver by accessing the Brother Solutions Center at
http://solutions.brother.com
Ports tab 1
Choose the port where your printer is connected or choose the path to the network printer you are using.
To Next Page
Loading...
