Brother DCP 8060 - Scan to Image; Scan to OCR

8.
130
Scan to Image 8
You can scan a colour picture into your graphics application for viewing and editing. You can change the
scan configuration. (See Image (example: Apple PreView) on page 136.)
a Put the document face up in the ADF, or face down on the scanner glass.
b Press (Scan).
c Press a or b to choose Scan to Image.
Press OK.
If your machine is a MFC-8460N or DCP-8060, go to Step e.
If your machine is a MFC-8860DN, go to Step d.
d Press a or b to choose 2sided (L)edge, 2sided (S)edge or 1sided.
Press OK.
Note
If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L) edge or 2sided (S) edge depending on your document layout.
e The machine starts the scanning process.
Scan to OCR 8
If your document is text, you can have it converted by Presto!
®
PageManager
®
OCR to an editable text file
and then have the result displayed in your word processing application for viewing and editing. You can
change the (Scan) configuration. (See OCR (word processing application) on page 138.)
a Put the document face up in the ADF, or face down on the scanner glass.
b Press (Scan).
c Press a or b to choose Scan to OCR.
Press OK.
If your machine is a MFC-8460N or DCP-8060, go to Step e.
If your machine is a MFC-8860DN, go to Step d.
d Press a or b to choose 2sided (L)edge, 2sided (S)edge or 1sided.
Press OK.
Note
If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L) edge or 2sided (S) edge depending on your document layout.
e The machine starts the scanning process.