3.
69
COPY 3
The Copy1-Copy4 buttons can be customized to allow you to use advanced copy functions such as N in 1
printing.
To use the Copy buttons, configure the printer driver by right-clicking the button.
Enter a name in Name for Copy (up to 30 characters) and choose Copy Ratio.
Choose the Resolution, Scan Type, Document Size, Duplex (two-sided) Scanning (if necessary),
Show Scanner Interface, Brightness and Contrast settings to be used.
If you want to scan a duplex document, check Duplex (two-sided) Scanning and choose
Long-edge binding or Short-edge binding. (Not available for MFC-8460N and DCP-8060)
Before finishing the Copy button configuration, set the Printer Name. Then click the Print Options... button
to display the printer driver settings.
To Next Page
Loading...
