Brother DCP 8060 - PC-FAX (Not Available for DCP Model); Device Settings

3.
58
PC-FAX (Not available for DCP model) 3
These buttons are for sending or receiving faxes using the Brother PC-FAX application.
 Send
Allows you to scan a page or document and automatically send the image as a fax from the PC using the
Brother PC-FAX software. (See PC-FAX sending on page 89.)
 Receive (Not available for English version)
By clicking this button, the PC-FAX receiving software is activated and starts receiving fax data from your
Brother machine. After running the PC-FAX receive software, this button changes to View Received to
open the viewer application and see the received faxes. Before you use the PC-FAX Receive function, you
must choose the option of PC-FAX Receive from the control panel menu of the Brother machine. (See
PC-FAX receiving on page 102.)
 Address Book
Allows you to open the Brother PC-FAX address book. (See Brother Address Book on page 95.)
 Setup
Allows you to configure the PC-FAX sending settings. (See Sending setup on page 91.)
DEVICE SETTINGS 3
You can configure the machine settings.
 Remote Setup
Allows you to open the Remote Setup Program. (See Remote Setup on page 87.)
 Quick-Dial
Allows you to open the Set Quick-Dial window of the Remote Setup. (See Remote Setup on page 87.)
 Status Monitor
Allows you to open the Status Monitor utility. (See Status Monitor on page 74.)