2.
34
Accessing the scanner 2
a Open the software application to scan a document.
Note
The instructions for scanning in this Guide are for when you use Imaging for Windows
®
. If you are
scanning into another software application, the steps may vary.
b Choose the scanner you are using from the Select Device of the File menu.
Note
If the machine is connected via:
• Parallel-use Brother MFC-XXXX or Brother DCP-XXXX
• USB-use Brother MFC-XXXX USB or Brother DCP-XXXX USB
• LAN-use Brother MFC-XXXX LAN or Brother DCP-XXXX LAN
If you are using Windows
®
XP, choose TW-Brother MFC XXXX, not WIA-Brother MFC-XXXX.
(Where XXXX is your model name)
c Select Acquire Image from the File drop-down menu or select the Scan New icon.
The Scanner Setup dialog box appears:
To Next Page
Loading...
