2.
44
Scanning a document into the PC 2
There are two ways in which you can scan a whole page. You can either use the ADF (automatic document
feeder) or the Flatbed scanner glass.
If you would like to scan and then crop a portion of a page after pre-scanning the document, you will need to
use the scanner glass (Flatbed). (See Pre-Scanning to crop a portion you want to scan on page 37.)
Scanning a document using the ADF 2
a Load your document.
b Select the picture type (A).
c Select the Document Feeder from the Paper source drop-down list box (C).
d Select the Paper size from the drop-down list (D).
A
B
C
D
To Next Page
Loading...
