8.
123
b Adjust the following settings, if needed, in the Scanner Setup dialog box:
Resolution
Scan Type
Document Size
Brightness
Contrast
c Click Start.
When scanning has finished, the image appears in your graphics application.
Scanning a duplex document (for models that support duplex scanning) 8
a Put the document face up in the ADF.
b Check Duplex (Two-sided) Scanning and choose Long-edge binding or Short-edge binding.
c Adjust the following settings, if needed, in the Scanner Setup dialog box:
Resolution
Scan Type
Document size
Brightness
Contrast
d Click Start.
Note
• You cannot adjust the scanning area.
• Duplex scan is supported by the MFC-8860DN only.
• Duplex scan is not available for legal size paper.
• Duplex scanning is not supported in Mac OS
®
9.1 to 9.2.
• Duplex scan is available from the ADF only.
To Next Page
Loading...
