9.
147
Enter a name in Name for Copy (up to 30 characters) and choose Copy Ratio.
Choose the Resolution, Scan Type, Document Size, Duplex (two-sided) Scanning (if necessary), Show
Scanner Interface, Brightness and Contrast settings to be used.
Before finishing the Copy button configuration, set the Printer Name. Then choose your print settings from
the Presets pop-up menu, then click OK to close the dialog box. By clicking the configured copy button, the
print dialog box opens.
To copy, choose Copies & Pages from the pop-up menu.
To fax, choose Send Fax from the pop-up menu. (Sending a fax on page 119.)
To Next Page
Loading...
