2.
36
Scanning a duplex document (For models that support duplex scanning) 2
a Put the document face up in the ADF.
b Check Duplex (Two-sided) Scanning and choose Long-edge binding or Short-edge binding (1).
c Adjust the following settings, if needed, in the Scanner Setup dialog box:
Scan (Image Type)
Resolution
Scan Type
Brightness
Contrast
Document Size
d Click Start.
Note
• You can not adjust the scanning area.
• You can not use legal size paper for duplex scanning.
• You can not use the PreScan button to preview an image .
1
To Next Page
Loading...
