4-20
Confidential
6 IF YOU REPLACE THE RECORDING PAPER FEEDING RELATED
PARTS OR MAINTENANCE UNIT
The paper feeding related parts to be adjusted after replacement are listed below.
• Paper feed roller • Inner chute ASSY
• Paper ejection roller • Registration sensor PCB ASSY
• Carriage PCB ASSY • Carriage motor ASSY
• Flushing box • Paper feed motor
• Platen ASSY • Flushing base
• CR encoder strip • Maintenance unit
• PF encoder disk • CR timing belt
• PF encoder sensor PCB ASSY
<Operations>
6.1 Check Head Nozzles (Maintenance mode 09)
6.2 Adjustment of Software Correction for Inclination/Corrugation/Ruled Lines
(Maintenance mode 65)
6.3 Update the Paper Feeding Correction Values (Maintenance mode 58)
6.4 Margin Adjustment in Borderless Printing (Maintenance mode 66)
6.5 Check Printing
<Requirements>
(1) USB cable: 1 piece
(2) Create a temporary folder in the PC's C drive (Windows XP or later).
(3) Download utility (FILEDG32.EXE)
Make a copy of the download utility in the temporary folder in the C drive.
(4) Maintenance driver (MaintenanceDriver.zip)
Make a copy of the maintenance driver in the temporary folder in the C drive. Extract
the copied file and install it. Refer to "APPENDIX 3. INSTALLING THE
MAINTENANCE DRIVER" for details on the installation.
(5) Data files of print patterns
To Next Page
Loading...
