Brother GTX-4 - Page 289

289
Troubleshooting
Error code Error message Description Remedy
1092
[Wiper Cleaner Replacing
White]
The wiper cleaner on the
white side needs to be
replaced with a new one.
With reference to "7-1-3. Replacing the wiper
cleaner >>P.187", replace the old wiper cleaner
with a new one.
1093
[Wiper Cleaner Replacing
White]
The wiper cleaner on the
white side needs to be
replaced with a new one.
With reference to "7-1-3. Replacing the wiper
cleaner >>P.187", replace the old wiper cleaner
with a new one.
1095
[Wiper Cleaner Replacing
Color]
The wiper cleaner on the
color side needs to be
replaced with a new one.
With reference to "7-1-3. Replacing the wiper
cleaner >>P.187", replace the old wiper cleaner
with a new one.
1096
[Wiper Cleaner Replacing
Color]
The wiper cleaner on the
color side needs to be
replaced with a new one.
With reference to "7-1-3. Replacing the wiper
cleaner >>P.187", replace the old wiper cleaner
with a new one.
1100
[Pump Tube To Be
Replaced]
Pump tube needs to be
replaced.
Make note of the error code and error message,
and please notify it to your dealer.
1120
[White Head Cleaning
Timing]
The white heads need to be
cleaned.
With reference to "9-2-2. White head cleaning
>>P.251", clean the white heads.
After the white head cleaning is completed,
conduct the Install White Ink After Cleaning.
1125
[Install White Ink After
Cleaning]
Because the white head
cleaning is performed, the
Install White Ink After
Cleaning function needs to be
put into execution.
With reference to "9-2-2. White head cleaning
>>P.251", conduct the Install White Ink After
Cleaning.
1202
[Remove the White Ink
Cartridge and shake it]
The white ink needs to be
stirred.
With reference to "6-2-3. Daily agitation of the
white ink >>P.127", stir the white ink.
Pressing
after the stirring causes the White
Ink Refilling function to be put into execution.
1210 [Exhaust Fan Stop]
The exhaust fan is not
working.
Make note of the error code and error message,
and please notify it to your dealer.
1501
[Fan Filter To Be
Replaced]
The fan filter needs to be
replaced with a new one.
With reference to "7-1-6. Replacing the fan filter
>>P.196", replace the fan filter with a new one.
1601
[Flushing Foam
Replacing White]
The flushing foam on the
white side needs to be
replaced with a new one.
With reference to "7-1-4. Replacing the flushing
foam >>P.189", replace the flushing foam with a
new one.
1602
[Flushing Foam
Replacing White]
The flushing foam on the
white side needs to be
replaced with a new one.
With reference to "7-1-4. Replacing the flushing
foam >>P.189", replace the flushing foam with a
new one.
1605
[Flushing Foam
Replacing Color]
The flushing foam on the
color side needs to be
replaced with a new one.
With reference to "7-1-4. Replacing the flushing
foam >>P.189", replace the flushing foam with a
new one.
1606
[Flushing Foam
Replacing Color]
The flushing foam on the
color side needs to be
replaced with a new one.
With reference to "7-1-4. Replacing the flushing
foam >>P.189", replace the flushing foam with a
new one.
1700
[Nozzle Guard Cleaning
Timing]
The nozzle guard needs to be
cleaned.
With reference to "7-1-2. Cleaning the nozzle
guard, wiper, exhaust cap, and suction cap
>>P.177", clean the nozzle guard.