296
Troubleshooting
Error code
Error message Description Remedy
3412 [PC Data Error]
It is the communication error
between your PC and the
printer.
Check on the ARX4 file by means of "GTX-4 File
Viewer".
Make sure that your PC is connected to the printer,
and start communication between your PC and the
printer once again.
Restart your PC and the printer.
If the problem still persists, please contact your
dealer.
4100
[USB flash drive Access
Error]
No file can be opened.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again, and
perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
For details, refer to "9-1. Troubleshooting
instructions >>P.236".
4101
[USB flash drive Access
Error]
No file can be created.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again, and
perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
For details, refer to "9-1. Troubleshooting
instructions >>P.236".
4103
[USB flash drive Access
Error]
File search has ended up in
failure.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again, and
perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
For details, refer to "9-1. Troubleshooting
instructions >>P.236".
4104
[USB flash drive Access
Error]
The system has failed to read
the file.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again, and
perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
For details, refer to "9-1. Troubleshooting
instructions >>P.236".
4105
[USB flash drive Access
Error]
The system has failed to write
the file.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again, and
perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
For details, refer to "9-1. Troubleshooting
instructions >>P.236".
To Next Page
Loading...
