297
Troubleshooting
Error code
Error message Description Remedy
4106 [Illegal Format]
There is something wrong
with the file's data.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again, and
perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
For details, refer to "9-1. Troubleshooting
instructions >>P.236".
4108
[USB flash drive Access
Error]
The system has failed to
obtain the file size.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again, and
perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
For details, refer to "9-1. Troubleshooting
instructions >>P.236".
4200 [Machine Error]
Abnormal indication is found
in the language data on the
LCD screen.
In the event that this error is displayed after
suspending the updating of firmware, please start
the updating operation over from the beginning.
If the problem still persists, please contact your
dealer.
4201 [Machine Error]
Abnormal indication is found
in the language data on the
LCD screen.
In the event that this error is displayed after
suspending the updating of firmware, please start
the updating operation over from the beginning.
If the problem still persists, please contact your
dealer.
4202 [Machine Error]
Abnormal indication is found
in the language data on the
LCD screen.
In the event that this error is displayed after
suspending the updating of firmware, please start
the updating operation over from the beginning.
If the problem still persists, please contact your
dealer.
4400 [Test print data Error]
An error is detected in the
print data for test print menu.
In the event that this error is displayed after
suspending the updating of firmware, please start
the updating operation over from the beginning.
If the problem still persists, please contact your
dealer.
4401 [Test print data Error]
An error is detected in the
print data for test print menu.
In the event that this error is displayed after
suspending the updating of firmware, please start
the updating operation over from the beginning.
If the problem still persists, please contact your
dealer.
4402 [Test print data Error]
An error is detected in the
print data for test print menu.
In the event that this error is displayed after
suspending the updating of firmware, please start
the updating operation over from the beginning.
If the problem still persists, please contact your
dealer.
To Next Page
Loading...
