Brother HL-2170W - Page 132

3-76
Confidential
(5) Remove the four Taptite bind B M4x12 screws and the two Taptite cup S M3x6 SR
screws, and then remove the Main frame L ASSY from the Main body.
Memo :
• Remove the Main frame L ASSY in the state that the DEV joint link is pulled out.
Fig. 3-71
Taptite bind B M4x12
Taptite cup S M3x6 SR
<Upper surface of Main frame L ASSY>
Drive sub ASSY
Main frame L
ASSY
Taptite bind B M4x12
Taptite bind B M4x12
DEV joint link
Taptite cup S M3x6 SR
Taptite bind
B M4x12