Brother HL-2170W - Configuration in Ad-hoc mode

1-21
Confidential
3.7 Curl in the paper
(1) Turn the Nip release lever of right and left to the direction of the arrow.
(2) Hold and turn the PR stopper plate of right and left.
Fig. 1-5
Step Cause Check Result Remedy
1
High pressure of
pressure roller in
the fuser unit
Is the problem solved by
changing the position of
the pressure roller?
Ye s
Change the position of the
pressure roller.
NIP RELEASE LEVER
NIP RELEASE LEVER
PR STOPPER PLATE
PRESSURE ROLLER
2
2
1
1
1
1