Brother HL-2170W - Configuration using the automatic wireless (one-push) method

1-39
Confidential
■ Pickup function of paper tray does not work.
■ A new toner cannot be detected.
Step Cause Remedy
1
Link arm does not operate
smoothly or keeps catching.
Check whether the link arm operates
correctly.
2
Pickup roller holder ASSY does
not operate smoothly or keeps
catching.
Check whether the pickup roller holder
ASSY operates correctly.
3 Roller holder ASSY failure Replace the roller holder ASSY.
4 Main motor failure Replace the main motor.
5 Main PCB failure Replace the main PCB ASSY.
Step Cause Remedy
1
New toner actuator does not
operate smoothly or keeps
catching.
Check whether the new toner actuator
operates correctly.
2 New toner actuator is damaged. Replace the new toner actuator.
3 Main PCB failure Replace the main PCB ASSY.
4
New toner sensor harness ASSY
failure
Replace the new toner sensor harness
ASSY.