Brother HL-2170W - Page 60

3-4
Confidential
* The parenthesis shows the number of screws for HL-2150N/2170W.
UNDER FG WIRE Taptite bind B M4x12 1 0.8±0.1 (8±1)
Taptite cup S M3x6 SR 1 0.8±0.05 (8±0.5)
DRIVE SUB ASSY Taptite cup S M3x6 SR 1 0.6±0.1 (6±1)
Taptite bind B M4x12 9 0.8±0.1 (8±1)
NEW TONER SENSOR HARNESS
ASSY
Taptite bind B M3x10
10.5±0.1 (5±1)
REGISTRATION SOLENOID Taptite bind B M3x10 1 0.5±0.1 (5±1)
T1 SOLENOID Taptite bind B M3x10 1 0.5±0.1 (5±1)
FU FRONT PLATE GUIDE Taptite bind B M3x10 3 0.5±0.1 (5±1)
CHUTE GROUND PLATE Taptite cup S M3x6 SR 2 0.6±0.1 (6±1)
MAIN SHIELD PLATE Taptite bind B M4x12 3 0.8±0.1 (8±1)
MAIN FRAME L ASSY Taptite bind B M4x12 4 0.8±0.1 (8±1)
Taptite cup S M3x6 SR 2 0.7±0.1 (7±1)
Location of screw Screw type Q’ty
Tightening torque
N m (kgf · cm)