2-26
Confidential
No Tray Reinstall tray 1
The T1 paper feed sensor
detected that the paper tray 1 is
open in 2-sided printing or
printing by feeding paper from
the T2 paper tray unit.
(after the registration of printing in
the engine)
8505 2-68
The T1 paper feed sensor
detected that the paper tray 1 is
open in 2-sided printing or
printing by feeding paper from
the T2 paper tray unit.
(before the registration of
printing in the engine)
8501 2-68
The paper tray
cannot be
detected, re-install
#T.
While the T2 paper tray unit is
open state, print or adjustment
operation was attempted.
8402 2-67
No Waste
Toner
Install the Waste
Toner Box.
The waste toner sensor detected
that no waste toner box was set.
6300 2-58
Not
Available
-
The function is not available for
any IDs.
--- 4.10.3
Out of
Memory
Press Cancel
The memory is insufficient to
expand the data of PC-Print.
C700 2-81
Turn the power off,
and then on again.
The program update process
cannot be performed because
the memory is insufficient.
--- 4.10.2
Print Data
Full
Print Data is full.
Press Cancel and
delete the
previously stored
data.
The memory used to store
secure print data exceeded the
memory size for secure print
data.
C800 2-81
Prinit Unable
**
Error related to print
Refer to the error code of “**”.
**
Registration Registration failed.
Insufficient Toner
for Registration.
Dot counter or develop roller
counter of color toner has
reached the upper limit during
auto color registration performed
from the control panel.
9A02 2-78
Registration failed.
Press Go, and try
again.
Error occurred during patch data
printing in auto color registration
performed from the control panel.
9A03 2-79
Registration failed.
Turn the power off
and then back on
again.
Error occurred with the value
measured during auto color
registration performed from the
control panel.
9A01 2-78
Error Message
State
Error
Codes
Refer
to:
1st line 2nd line
To Next Page
Loading...
